Advertisement
T
C
RIGGER
OMMANDS
TRIGGER
trigger
Overview
This command is used to access the Trigger Configuration mode for the specified
trigger. Once Trigger Configuration mode has been entered the trigger type
information can be configured and the trigger scripts and other operational
parameters can be specified. At a minimum the trigger type information must be
specified before the trigger can become active.
The no variant of this command removes a specified trigger and all configuration
associated with it.
trigger <1-250>
Syntax
no trigger <1-250>
Mode
Global Configuration
To enter trigger configuration mode for trigger 12 use the command:
Examples
awplus#
To completely remove all configuration associated with trigger 12, use the
command:
awplus#
Related
show trigger
Commands
trigger activate
613-50137-01 Rev A
Parameter
Description
<1-250>
A trigger ID.
trigger 12
no trigger 12
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1664
Advertisement
Troubleshooting
