A
C
UTHENTICATION
OMMANDS
-
-
-
AUTH
WEB
SERVER PING
POLL INTERVAL
auth-web-server ping-poll interval
Overview
This command is used to change the ping poll interval. The interval specifies the
time period between pings when the supplicant (client device) is reachable.
Use the no variant of this command to reset to the default period for ping polling
(30 seconds).
Syntax
auth-web-server ping-poll interval <1-65535>
no auth-web-server ping-poll interval
Default
The interval for ping polling is 30 seconds by default.
Mode
Global Configuration
To set the interval of ping polling to 60 seconds, use the following commands:
Examples
awplus#
awplus(config)#
To set the interval of ping polling to the default (30 seconds), use the following
commands:
awplus#
awplus(config)#
Validation
show auth
Commands
show auth-web-server
show running-config
613-50137-01 Rev A
Parameter
<1-65535>
configure terminal
auth-web-server ping-poll interval 60
configure terminal
no auth-web-server ping-poll interval
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Seconds.
1017