Advertisement
A
T
M
F
LLIED
ELESIS
ANAGEMENT
ATMF PROVISION
atmf provision
Overview
This command configures a specified port on an AMF node to accept a provisioned
node, via an AMF link, some time in the future.
Use the no variant of this command to remove the provisioning on the node.
Syntax
atmf provision [<nodename>]
no atmf provision
Default
No AMF provisioning.
Mode
Interface Configuration for a switchport, a static aggregator or a dynamic channel
group.
Usage
The port should be configured as an AMF link or cross link and should be "down"
to add or remove a provisioned node.
Example
To provision an AMF node named node1 for port1.0.1, use the command:
host1(config)#
host1(config-if)#
Related
switchport atmf-link
Commands
switchport atmf-crosslink
show atmf links
613-50137-01 Rev A
™ (AMF) C
RAMEWORK
OMMANDS
Parameter
<nodename>
interface port1.0.1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The name of the provisioned node that will appear on
the AMF network in the future.
atmf provision node1
1327
Advertisement
Troubleshooting
