Storm-Downtime - Centrecom FS980M/9 Command Reference Manual

Q S C
O OMMANDS
-
STORM DOWNTIME

storm-downtime

Overview Sets the time to re-enable a port that has been disabled by QoS Storm Protection
(QSP). The time is given in seconds, from a minimum of one second to maximum
of 86400 seconds (i.e. one day).
The no variant of this command resets the time to the default value of 10 seconds.
Syntax storm-downtime <1-86400>
no storm-downtime
Default 10 seconds
Mode Policy Map Class Configuration
Examples To re-enable the port in 1 minute, use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
To re-set the port to the default (10 seconds), use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
Related storm-action
Commands
storm-protection
storm-rate
storm-window
613-50137-01 Rev A
Parameter
<1-86400>
configure terminal
policy-map pmap2
configure terminal
policy-map pmap2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Seconds.
class cmap1
storm-downtime 60
class cmap1
no storm-downtime
896