Aaa Accounting Auth-Mac - Centrecom FS980M/9 Command Reference Manual

AAA C
OMMANDS
-
AAA ACCOUNTING AUTH MAC

aaa accounting auth-mac

Overview This command configures the default accounting method list for MAC-based
authentication. The default accounting method list specifies what type of
accounting messages are sent and which RADIUS servers the accounting
messages are sent to. The default accounting method list is automatically applied
to interfaces with MAC-based authentication enabled.
Use the no variant of this command to disable AAA accounting for MAC-based
authentication globally.
aaa accounting auth-mac default {start-stop|stop-only|none}
Syntax
group {<group-name>|radius}
no aaa accounting auth-mac default
Default RADIUS accounting for MAC-based Authentication is disabled by default
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages are sent:
•
•
The accounting event to send to the RADIUS server is configured with the
following options:
•
•
•
613-50137-01 Rev A
Parameter Description
default
Configure the default accounting method list
start-stop
Sends a start accounting message at the beginning of the session
and a stop accounting message at the end of the session.
stop-only
Only sends a stop accounting message at the end of the session.
none
No accounting record sent.
group
Use a server group
<group-name>
Server group name.
radius
Use all RADIUS servers.
group radius: use all RADIUS servers configured by
command
group <group-name>: use the specified RADIUS server group configured
with the aaa group server
start-stop: sends a start accounting message at the beginning of a session
and a stop accounting message at the end of the session.
stop-only: sends a stop accounting message at the end of a session.
none: disables accounting.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
command
radius-server host
1052