Advertisement
LLDP C
OMMANDS
SHOW DEBUGGING LLDP
show debugging lldp
Overview
This command displays LLDP debug settings for specified ports. If no port list is
supplied, LLDP debug settings for all ports are displayed.
show debugging lldp [interface <port-list>]
Syntax
Mode
User Exec and Privileged Exec
Examples
To display LLDP debug settings for all ports, use the command:
awplus#
To display LLDP debug settings for ports 1.0.1 to 1.0.6, use the command:
awplus#
Output
Figure 42-1: Example output from the show debugging lldp command
Table 1: Parameters in the output of the show debugging lldp command
613-50137-01 Rev A
Parameter
Description
<port-list>
The ports for which the LLDP debug settings are shown.
show debugging lldp
show debugging lldp interface port1.0.1-1.0.6
LLDP Debug settings:
Debugging for LLDP internal operation is on
Port
Rx
RxPkt
------------------------------------
1.0.1
Yes
Yes
1.0.2
Yes
No
1.0.3
No
No
1.0.4
Yes
Yes
1.0.5
Yes
No
1.0.6
Yes
Yes
Parameter
Description
Port
Port name.
Rx
Whether debugging of LLDP receive is enabled on the port.
RxPkt
Whether debugging of LLDP receive packet dump is enabled on the
port.
Rx
Whether debugging of LLDP transmit is enabled on the port.
RxPkt
Whether debugging of LLDP transmit packet dump is enabled on the
port.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Tx
TxPkt
No
No
No
No
No
No
Yes
No
Yes
No
Yes
Yes
1550
Advertisement
Troubleshooting
