Auth Radius Send Service-Type - Centrecom FS980M/9 Command Reference Manual

RADIUS C
OMMANDS
-
AUTH RADIUS SEND SERVICE TYPE

auth radius send service-type

Overview Use this command to enable the device to include the Service-Type(6) attribute in
RADIUS authentication requests. The Service-Type attribute has a value of:
•
•
•
Use the no variant of this command to stop including the Service-Type attribute.
auth radius send service-type
Syntax
no auth radius send service-type
Mode Global Configuration
Example To send the Service-Type attribute, use the commands:
awplus#
awplus(config)#
Related auth radius send nas-identifier
Commands
613-50137-01 Rev A
Framed(2) for 802.1x
Call-Check(10) for MAC authentication
Unbound(5) for Web authentication.
configure terminal
auth radius send service-type
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1101