Show Ntp Counters - Centrecom FS980M/9 Command Reference Manual

NTP C
OMMANDS

SHOW NTP COUNTERS

show ntp counters
Overview This command displays packet counters for NTP.
show ntp counters
Syntax
Mode User Exec and Privileged Exec
Example To display counters for NTP use the command:
awplus#
Figure 40-1: Example output from show ntp counters
Table 40-1: Parameters in the output from show ntp counters
613-50137-01 Rev A
show ntp counters
uptime:
sysstats reset:
packets received:
current version:
older version:
bad length or format:
authentication failed:
declined:
restricted:
rate limited:
KoD responses:
processed for time:
Parameter Description
uptime
How long NTP has been running since it was last restarted, in
seconds.
sysstats reset
How long since
seconds.
packets
Total number of NTP client and server packets received by the
received
device.
current
The number of version 4 NTP packets received.
version
older version
The number of NTP packets received that are from an older
version, down to version 1, of NTP. NTP is compatible with these
versions and processes these packets.
bad length or
The number of NTP packets received that do not conform to the
format
standard packet length. NTP drops these packets.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
7212 
7212 
307 
237 
69 
0 
0 
0 
0 
0 
0 
306
show ntp status information was last reset, in
1469