Lldp Run - Centrecom FS980M/9 Command Reference Manual

LLDP C
OMMANDS

LLDP RUN

lldp run
Overview This command enables the operation of LLDP on the device.
The no variant of this command disables the operation of LLDP on the device. The
LLDP configuration remains unchanged.
Syntax lldp run
no lldp run
Default LLDP is disabled by default.
Mode Global Configuration
Examples To enable LLDP operation, use the commands:
awplus#
awplus(config)#
To disable LLDP operation, use the commands:
awplus#
awplus(config)#
Related show lldp
Commands
613-50137-01 Rev A
configure terminal
lldp run
configure terminal
no lldp run
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1532