Aaa Authentication Auth-Mac - Centrecom FS980M/9 Command Reference Manual

AAA C
OMMANDS
-
AAA AUTHENTICATION AUTH MAC

aaa authentication auth-mac

Overview This command enables MAC-based authentication globally and allows you to
enable an authentication method list (in this case, a list of RADIUS servers). It is
automatically applied to every interface running MAC-based authentication.
Use the no variant of this command to disable MAC-based authentication globally.
Syntax aaa authentication auth-mac default group {<group-name>|radius}
no aaa authentication auth-mac default
Default MAC-based Port Authentication is disabled by default.
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages are sent:
•
•
All configured RADIUS Servers are automatically members of the server group
radius. If a server is added to a named group <group-name>, it also remains a
member of the group radius.
Examples To enable MAC-based authentication globally for all RADIUS servers, and use all
available RADIUS servers, use the commands:
awplus#
awplus(config)#
radius
To disable MAC-based authentication, use the commands:
awplus#
awplus(config)#
Related aaa accounting auth-mac
Commands
aaa group server
auth-mac enable
613-50137-01 Rev A
Parameter Description
default
Configure the default authentication method list
group
Use a server group
<group-name>
Server group name.
radius
Use all RADIUS servers.
group radius: use all RADIUS servers configured by
command
group <group-name>: use the specified RADIUS server group configured
with the aaa group server
configure terminal
aaa authentication auth-mac default group
configure terminal
no aaa authentication auth-mac default
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
command
radius-server host
1065