Show Ipv6 Mld Interface - Centrecom FS980M/9 Command Reference Manual

MLD S C
NOOPING OMMANDS
6
SHOW IPV MLD INTERFACE

show ipv6 mld interface

Overview Use this command to display the state of MLD and MLD Snooping for a specified
interface, or all interfaces.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 mld interface [<interface>]
Mode User Exec and Privileged Exec
Example The following command displays MLD interface status on all interfaces enabled for
MLD:
awplus#
Output
613-50137-01 Rev A
Parameter Description
<interface>
Interface name.
show ipv6 mld interface
awplus#show ipv6 mld interface

Interface vlan1 (Index 301)
MLD Enabled, Active, Querier, Version 2 (default)
Internet address is fe80::215:77ff:fec9:7468
MLD interface has 0 group-record states
MLD activity: 0 joins, 0 leaves
MLD robustness variable is 2 
MLD last member query count is 2 
MLD query interval is 125 seconds
MLD querier timeout is 255 seconds
MLD max query response time is 10 seconds
Last member query response interval is 1000 milliseconds
Group Membership interval is 260 seconds
MLD Snooping is globally enabled
MLD Snooping is enabled on this interface
MLD Snooping fast-leave is not enabled
MLD Snooping querier is enabled
MLD Snooping report suppression is enabled
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
"Getting Started
Guide.
752