Aaa Accounting Commands - Centrecom FS980M/9 Command Reference Manual

AAA C
OMMANDS

AAA ACCOUNTING COMMANDS

aaa accounting commands
Overview This command configures and enables TACACS+ accounting on commands
entered at a specified privilege level. Once enabled for a privilege level, accounting
messages for commands entered at that privilege level will be sent to a TACACS+
server.
In order to account for all commands entered on a device, configure command
accounting for each privilege level separately.
The command accounting message includes, the command as entered, the date
and time the command finished executing, and the user-name of the user who
executed the command.
Use the no variant of this command to disable command accounting for a
specified privilege level.
aaa accounting commands <1-15> default stop-only group tacacs+
Syntax
no aaa accounting commands <1-15> default
Default TACACS+ command accounting is disabled by default.
Mode Global Configuration
Usage This command only supports a default method list, this means that it is applied to
every console and VTY line.
The stop-only parameter indicates that the command accounting messages are
sent to the TACACS+ server when the commands have stopped executing.
The group tacacs+ parameters signifies that the command accounting messages
are sent to the TACACS+ servers configured by the
Note that up to four TACACS+ servers can be configured for accounting. The
servers are checked for reachability in the order they are configured with only the
first reachable server being used. If no server is found, the accounting message is
dropped.
613-50137-01 Rev A
Parameter Description
<1-15>
The privilege level being configured, in the range 1 to 15.
default
Use the default method list, this means the command is applied
globally to all user exec sessions.
stop-only
Send accounting message when the commands have stopped
executing.
group
Specify the server group where accounting messages are sent.
Only the tacacs+ group is available for this command.
tacacs+
Use all TACACS+ servers configured by the
command.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
tacacs-server host
tacacs-server host command.
1056