Atmf Provision Node Clone - Centrecom FS980M/9 Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF PROVISION NODE CLONE

atmf provision node clone
Overview This command sets up a space on the backup media for use with a provisioned
node and copies into it almost all files and directories from a chosen backup or
provisioned node.
Alternatively, you can set up a new, unique provisioned node by using the
command
atmf provision node <nodename> clone <source-nodename>
Syntax
Mode Privileged Exec
Usage This command is only available on master nodes in the AMF network.
You must run either this command or
before you can use other atmf provision node commands using the specified
node name. If a backup or provisioned node already exists for the specified node
then you must delete it before using the atmf provision node clone command.
When using this command it is important to be aware of the following:
•
•
•
•
The active and backup configuration files are automatically modified in the
following ways:
•
•
Example To copy from the backup of device2 to create backup files for the new provisioned
node device3 use the following command:
device1#
613-50137-01 Rev A
™ (AMF) C
RAMEWORK OMMANDS
atmf provision node
Parameter
<nodename>
<source-nodename>
A copy of <media>:atmf/<atmf_name>/nodes/<source_node>/flash will be
made for the provisioned node and stored in the backup media.
The directory <node_backup_dir>/flash/.config/ssh is excluded from the
copy.
All contents of <root_backup_dir>/nodes/<nodename> will be deleted or
overwritten.
Settings for the expected location of other provisioned nodes are excluded
from the copy.
The hostname command is modified to match the name of the provisioned
node.
The stack virtual-chassis-id command is removed, if present.
atmf provision node device3 clone device2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
create.
Description
The name that will be assigned to the clone when
connected.
The name of the node whose configuration is to be
copied for loading to the clone.
atmf provision node create command,
1328