Advertisement
LLDP C
OMMANDS
SHOW LOCATION
show location
Overview
Use this command to display selected location information configured on the
switch.
show location {civic-location|coord-location|elin-location}
Syntax
show location {civic-location|coord-location|elin-location}
identifier {<civic-loc-id>|<coord-loc-id>|<elin-loc-id>}
show location {civic-location|coord-location|elin-location}
interface <port-list>
Mode
User Exec and Privileged Exec
Examples
To display a civic address location configured on port1.0.1, use the command:
awplus#
Table 49: Example output from the show location command
To display coordinate location information configured on the identifier 1, use the
command:
awplus#
613-50137-01 Rev A
Parameter
civic-location
coord-location
elin-location
<civic-loc-id>
<coord-loc-id>
<elin-loc-id>
<port-list>
show location civic-location interface port1.0.1
awplus# show location civic-location interface port1.0.1
Port
ID
Element Type
----------------------------------------------------------------
1.0.1
1
Country
City
Street-suffix
House-number
Primary-road-name
show location coord-location identifier 1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Display civic location information.
Display coordinate location information.
Display ELIN location information.
Civic address location identifier, in the range 1 to 4095.
Coordinate location identifier, in the range 1 to 4095.
ELIN location identifier, in the range 1 to 4095.
Ports to display information about.
Element Value
NZ
Christchurch
Avenue
27
Nazareth
1571
Advertisement
Troubleshooting
