Debug Snmp - Centrecom FS980M/9 Command Reference Manual

SNMP C
OMMANDS

DEBUG SNMP

debug snmp
Overview This command enables SNMP debugging.
The no variant of this command disables SNMP debugging.
Syntax debug snmp
[all|detail|error-string|process|receive|send|xdump]
no debug snmp
[all|detail|error-string|process|receive|send|xdump]
Mode Privileged Exec and Global Configuration
Example To start SNMP debugging, use the command:
awplus#
To start SNMP debugging, showing detailed SNMP debugging information, use
the command:
awplus#
To start SNMP debugging, showing all SNMP debugging information, use the
command:
awplus#
Related show debugging snmp
Commands
terminal monitor
undebug snmp
613-50137-01 Rev A
Parameter Description
all
Enable or disable the display of all SNMP debugging information.
detail
Enable or disable the display of detailed SNMP debugging
information.
error-string
Enable or disable the display of debugging information for SNMP
error strings.
process
Enable or disable the display of debugging information for
processed SNMP packets.
receive
Enable or disable the display of debugging information for
received SNMP packets.
send
Enable or disable the display of debugging information for sent
SNMP packets.
xdump
Enable or disable the display of hexadecimal dump debugging
information for SNMP packets.
debug snmp
debug snmp detail
debug snmp all
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1476