Description (Trigger) - Centrecom FS980M/9 Command Reference Manual

T C
RIGGER OMMANDS
( )
DESCRIPTION TRIGGER

description (trigger)

Overview This command adds an optional description to help you identify the trigger. This
description is displayed in show command outputs and log messages.
The no variant of this command removes a trigger's description. The show
command outputs and log messages stop displaying a description for this trigger.
Syntax description <description>
no description
Mode Trigger Configuration
To give trigger 240 the description daily status report, use the commands:
Examples
awplus#
awplus(config)#
awplus(config-trigger)#
To remove the description from trigger 36, use the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
Related show trigger
Commands
test
trigger
613-50137-01 Rev A
Parameter Description
<description> A word or phrase that uniquely identifies this trigger or its purpose.
Valid characters are any printable character and spaces, up to a
maximum of 40 characters.
configure terminal
trigger 240
configure terminal
trigger 36
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
description daily status report
no description
1649