Epsr Trap - Centrecom FS980M/9 Command Reference Manual

E P S
THERNET ROTECTION WITCHED

EPSR TRAP

epsr trap
Overview This command enables SNMP traps for an EPSR instance. The traps will be sent
when the EPSR instance changes state.
The no variant of this command disables SNMP traps for an EPSR instance. The
traps will no longer be sent when the EPSR instance changes state.
Syntax epsr <epsr-instance> trap
no epsr <epsr-instance> trap
Mode EPSR Configuration
To enable traps for the EPSR instance called blue, use the command:
Example
awplus(config-epsr)#
To disable traps for the EPSR instance called blue, use the command:
awplus(config-epsr)#
Related epsr mode master controlvlan primary port
Commands
epsr mode transit controlvlan
show epsr
613-50137-01 Rev A
R (EPSR ™) C
ING ING OMMANDS
Parameter
<epsr-instance>
trap
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Name of the EPSR instance.
SNMP trap for the EPSR instance.
epsr blue trap
no epsr blue trap
1264