Advertisement
A
C
UTHENTICATION
OMMANDS
SHOW AUTH SUPPLICANT
show auth supplicant
Overview
This command shows the supplicant (client device) state when authentication is
configured for the switch. Use the optional brief parameter to show a summary of
the supplicant state.
show auth supplicant [<macadd>] [brief]
Syntax
Mode
Privileged Exec
Examples
To display a summary of authenticated supplicant information on the device, enter
the command:
awplus#
To display authenticated supplicant information on the device, enter the
command:
awplus#
To display authenticated supplicant information for device with MAC address
0000.5E00.5301, enter the command:
awplus#
Output
Figure 29-4: Example output from show auth supplicant brief
awplus#show auth supplicant brief
Interface port2.0.3
authenticationMethod: dot1x/mac/web
Two-Step Authentication
firstMethod: mac
secondMethod: dot1x/web
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 1
otherAuthenticationSupplicantNum: 0RADIUS Group Configuration
Interface
VID
Mode MAC Address
=========== ==== ==== ============== ================= =============== ========
port2.0.3
1
W
613-50137-01 Rev A
Parameter
Description
<macadd>
Mac (hardware) address of the supplicant.
Entry format is HHHH.HHHH.HHHH (hexadecimal).
brief
Brief summary of the supplicant state.
show auth supplicant brief
show auth supplicant
show auth supplicant 0000.5E00.5301
001c.233e.e15a Authenticated
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Status
IP Address
192.168.1.181
Username
test
1042
Advertisement
Troubleshooting
