Show Counter Dhcp-Client - Centrecom FS980M/9 Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
SHOW COUNTER DHCP CLIENT

show counter dhcp-client

Overview This command shows counters for the DHCP client on your device.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show counter dhcp-client
Mode User Exec and Privileged Exec
Example To display the message counters for the DHCP client on your device, use the
command:
awplus#
Output Figure 39-1: Example output from the show counter dhcp-client command
Table 1: Parameters in the output of the show counter dhcp-client command
Related ip address dhcp
Commands
613-50137-01 Rev A
P (DHCP) C
ROTOCOL OMMANDS
show counter dhcp-client
show counter dhcp-client

DHCPDISCOVER out
DHCPREQUEST out
DHCPDECLINE out
DHCPRELEASE out
DHCPOFFER in
DHCPACK in
DHCPNAK in
Parameter
DHCPDISCOVER out
DHCPREQUEST out
DHCPDECLINE out
DHCPRELEASE out
DHCPOFFER in
DHCPACK in
DHCPNAK in
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
......... 10
......... 34
......... 4
......... 0
......... 22
......... 18
......... 0
Description
The number of DHCP Discover messages sent by the client.
The number of DHCP Request messages sent by the client.
The number of DHCP Decline messages sent by the client.
The number of DHCP Release messages sent by the client.
The number of DHCP Offer messages received by the client.
The number of DHCP Acknowledgement messages received
by the client.
The number of DHCP Negative Acknowledgement
messages received by the client.
"Getting Started
Guide.
1447