Show Ip Dhcp Snooping Interface - Centrecom FS980M/9 Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW IP DHCP SNOOPING INTERFACE

show ip dhcp snooping interface
Overview Use this command to display information about DHCP snooping configuration and
leases for the specified ports, or all ports.
show ip dhcp snooping interface [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display DHCP snooping information for all ports, use the command:
awplus#
Table 16: Example output from the show ip dhcp snooping interface command
awplus#show ip dhcp snooping interface

DHCP Snooping Port Status and Configuration:

Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
Action: LG = Log
TR = Trap
LD = Link down

Port Status
--------------------------------------------------------------------------------
port1.0.1 Untrusted
port1.0.2 Untrusted
port1.0.3 Untrusted
port1.0.4 Untrusted
port1.0.5 Trusted
port1.0.6 Trusted
Table 17: Parameters in the output from the show ip dhcp snooping interface
613-50137-01 Rev A
Parameter Description
<port-list>
The ports to display DHCP snooping configuration information
for. If no ports are specified, information for all ports is displayed.
show ip dhcp snooping interface
Full Max
Leases Leases
1 1
0 50
0 50
0 50
0 1
0 1
command
Parameter Description
Port
The port interface name.
Status
The port status: untrusted (default) or trusted.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Action Subscriber-ID
LG -- --
LG TR LD Building 1 Level 1
LG -- --
LG -- -- Building 1 Level 2
-- -- --
-- -- --
1204