Debug Atmf - Centrecom FS980M/9 Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

DEBUG ATMF

debug atmf
Overview This command enables the AMF debugging facilities, and displays information
that is relevant (only) to the current node. The detail of the debugging displayed
depends on the parameters specified.
If no additional parameters are specified, then the command output will display all
AMF debugging information, including link events, topology discovery messages
and all notable AMF events.
The no variant of this command disables either all AMF debugging information, or
only the particular information as selected by the command's parameters.
debug atmf
Syntax
[link|crosslink|arealink|database|neighbor|error|all]
no debug atmf
[link|crosslink|arealink|database|neighbor|error|all]
Default All debugging facilities are disabled.
Mode User Exec and Global Configuration
Usage If no additional parameters are specified, then the command output will display all
AMF debugging information, including link events, topology discovery messages
and all notable AMF events.
NOTE
Examples To enable all AMF debugging, use the command:
node_1#
To enable AMF uplink and downlink debugging, use the command:
node_1#
To enable AMF error debugging, use the command:
node_1#
613-50137-01 Rev A
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
link
Output displays debugging information relating to uplink or
downlink information.
crosslink
Output displays all crosslink events.
arealink
Output displays all arealink events.
database
Output displays only notable database events.
neighbor
Output displays only notable AMF neighbor events.
error
Output displays AMF error events.
all
Output displays all AMF events.
: An alias to the no variant of this command is
debug atmf
debug atmf link
debug atmf error
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
undebug atmf on page 1441.
1357