Lldp Notification-Interval - Centrecom FS980M/9 Command Reference Manual

LLDP C
OMMANDS
-
LLDP NOTIFICATION INTERVAL

lldp notification-interval

Overview This command sets the notification interval. This is the minimum interval between
LLDP SNMP notifications (traps) of each kind (LLDP Remote Tables Change
Notification and LLDP-MED Topology Change Notification).
The no variant of this command sets the notification interval back to its default.
Syntax lldp notification-interval <5-3600>
no lldp notification-interval
Default The default notification interval is 5 seconds.
Mode Global Configuration
Examples To set the notification interval to 20 seconds, use the commands:
awplus#
awplus(config)#
To set the notification interval back to its default, use the commands:
awplus#
awplus(config)#
Related lldp notifications
Commands
show lldp
613-50137-01 Rev A
Parameter Description
<5-3600>
The interval in seconds.
configure terminal
lldp notification-interval 20
configure terminal
no lldp notification-interval
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1528