Show Ssh Client - Centrecom FS980M/9 Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

SHOW SSH CLIENT

show ssh client
Overview This command displays the current configuration of the Secure Shell client.
show ssh client
Syntax
Mode User Exec, Privileged Exec and Global Configuration
Example To display the current configuration for SSH clients on the login shell, use the
command:
awplus#
Output Figure 45-7: Example output from the show ssh client command
Table 7: Parameters in the output of the show ssh client command
Related show ssh server
Commands
613-50137-01 Rev A
show ssh client
Secure Shell Client Configuration
----------------------------------------------------------------
Port
Version
Connect Timeout
Session Timeout
Debug
Parameter Description
Port
SSH server TCP port where the SSH client connects to. The default
is port 22.
Version
SSH server version; either "1", "2" or "2,1".
Connect
Time in seconds that the SSH client waits for an SSH session to
Timeout
establish. If the value is 0, the connection is terminated when it
reaches the TCP timeout.
Debug
Whether debugging is active on the client.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
: 22
: 2,1
: 30 seconds
: 0 (off)
: NONE
1620