Igmp Snooping - Centrecom FS980M/9 Command Reference Manual

22
Introduction
Overview Devices running AlliedWare Plus use IGMP (Internet Group Management Protocol)
and MLD (Multicast Listener Discovery) to track which multicast groups their clients
belong to. This enables them to send the correct multimedia streams to the correct
destinations. IGMP is used for IPv4 multicasting, and MLD is used for IPv6
multicasting.
This chapter describes the commands to configure IGMP Snooping.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A

IGMP Snooping

"clear ip igmp" on page 701
"clear ip igmp group" on page 702
"clear ip igmp interface" on page 703
"debug igmp" on page 704
"ip igmp flood specific-query" on page 705
"ip igmp maximum-groups" on page 706
"ip igmp snooping" on page 708
"ip igmp snooping fast-leave" on page 709
"ip igmp snooping mrouter" on page 710
"ip igmp snooping querier" on page 711
"ip igmp snooping report-suppression" on page 712
"ip igmp snooping routermode" on page 713
"ip igmp snooping tcn query
"ip igmp static-group" on page 717
"ip igmp trusted" on page 719
"ip igmp version" on page 720
"show debugging igmp" on page 721
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Commands
solicit" on page 715
699