Functions
Moving the view
Explanation
Change-over
Explanation
Operation
Explanation
empty
Reset
Explanation
32
8.6
Moving the view
In some cases, the complete slice plane is longer displayed after the view is
enlarged.
"Hand"
Using the
Any region of the slice plane can thus be displayed.
Change-over to the
"Hand"
➢ Click the
or
"Hand"
➢ Select the
8.7
Positioning the crosshair with a single click
In certain situations, it is practical to position the crosshair at a specific loca-
tion with a single click.
"Crosshair"
1.
Select the
2.
Click the desired position in a view.
All slices will then be updated to display the selected position according
to the slice orientation.
8.8
Resetting the displays
"Back to default"
If you click the
reset to their default values.
Affected default values
●
Navigating through slices
●
Zoom
●
Move
●
Position of examination window
●
Position of 3D view
●
Contrast and brightness
"Analysis"
➢ Use the
or
➢ Enter [Ctrl] + [r] via the keyboard.
8.9
Measurements
GALAXIS offers the following measurement functions:
●
Measure lengths [ ➙ 33]
●
Measure angles [ ➙ 33]
mode, you can freely move the view as required.
"Hand"
mode can be performed in the following ways:
button.
"Analysis"
menu option on the
menu option on the
function, all views in all of the displays are
menu bar to select the
Sirona Dental Systems GmbH
Operator's Manual GALAXIS
menu bar.
"Analysis"
menu bar.
"Back to default"
menu option.
61 23 488 D 3474
D 3474.208.01.06.02 04.2010