Operating State Led; Line Voltage - Sirona CEREC AC Connect Operating Instructions For The Acquisition Unit

6 Installation and startup
28
Operating Instructions for the Acquisition Unit CEREC AC Connect
6.4.2

Operating state LED

A Operating state LED
B ON button
LED not lit:
LED lights up yel-
low:
LED lights up
green:
6.4.3

Line voltage

A Voltage selection insert
B Main fuses
➢ Check the set line voltage. The value of the line voltage must be
visible in the window with the module inserted (230V in Europe,
100V in Japan and 115V in the USA). If the set voltage does not
agree with the actual line voltage, you must change this setting:
WARNING
Risk of electric shock
Electric shock due to inserted power plug.
➢ Disconnect the power plug before selecting the line voltage.
Sirona Dental Systems GmbH
Acquisition unit is switched off at main switch.
Acquisition unit is switched on at main switch,
Windows is shut down and the PC is switched
off.
Acquisition unit is switched on at ON button
and ready for operation.
C Fuse module
C Window
A
B
A
B
C
D