Connection Of External Equipment; Maintenance And Repair; Changes To The Product; Accessories - Sirona inEos Blue Operating Instructions Manual

3 Safety
3.1 Basic safety information
10
3.1.3

Connection of external equipment

Connection of external equipment
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.
3.1.4

Maintenance and repair

Maintenance and repair
As manufacturers of dental instruments and laboratory equipment, we
can assume responsibility for the safety properties of the unit only if the
following points are observed:
● The Maintenance and repair of this unit may be performed only by
Sirona or by agencies authorized by Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
3.1.5

Changes to the product

Changes to the product
Modifications to this unit which may affect the safety of the operator,
patients or third parties are prohibited by law!
3.1.6

Accessories

Accessories
In order to ensure product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user assumes the risk of using non-approved accessories.
3.1.7

In case of damage

In case of damage
In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your dental depot or the manufacturer.
Sirona Dental Systems GmbH
Operating Instructions Sirona Dental CAD/CAM System
D3446.201.02.03.23 07.2011
63 33 632 D3446