Safety; Basic Safety Information; Prerequisites; Maintenance And Repair - Sirona CEREC MC XL Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL
61 46 885 D 3439
D 3439.201.02.11.02 10.2009
4

Safety

4.1

Basic safety information

4.1.1

Prerequisites

NOTICE
Important information on the building installation
The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies in
Germany.
NOTICE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
CAUTION
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
4.1.2

Maintenance and repair

As manufacturers of dental instruments and laboratory equipment, we can
assume responsibility for the safety properties of the unit only if the following
points are observed:
● The Maintenance and repair of this unit may be performed only by Sirona
or by agencies authorized by Sirona.
● Components which have failed and influence the safety of the unit must
be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
4.1.3

Modifications of the unit

Modifications to this unit which may affect the safety of the operator, patients
or third parties are prohibited by law!
4.1.4

Accessories

In order to guarantee product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved by
Sirona. The user assumes the risk of using non-approved accessories.
4 Safety
Basic safety information
9