Sirona Dental Systems GmbH
Operating Instructions for the Acquisition Unit Sirona Dental CAD/CAM System
63 33 582 D3492
D3492.201.01.09.23 09.2011
CAUTION
Note on the prevention, recognition and elimination of unintended
electromagnetic effects:
The CEREC AC acquisition unit is a Class B unit (classified according
to CISPR 11, EN 60601-1-2: 2006 based on IEC 60601-1-2:2001 and
A1:2004).
This system may be operated in a residential area provided that it is
used under the responsibility of a medical specialist.
NOTICE
Install only approved software
To prevent interference with the runtime reliability of the program, only
approved software may be installed.
NOTICE
Ventilation openings must not be obstructed.
4.1.4
Maintenance and repair
Maintenance and repair
As manufacturers of dental instruments and laboratory equipment, we
can assume responsibility for the safety properties of the unit only if the
following points are observed:
● The Maintenance and repair of this unit may be performed only by
Sirona or by agencies authorized by Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
4.1.5
Changes to the product
Changes to the product
Modifications to this unit which may affect the safety of the operator,
patients or third parties are prohibited by law!
4.1.6
Accessories
Accessories
In order to ensure product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user assumes the risk of using non-approved accessories.
4 Safety
11