Maintenance And Repair; Modifications Of The Unit; Accessories; Sirocam 3 - Sirona Cerec 3 Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions for the Acquisition Unit CEREC 3
63 22 700 D 3344
D 3344.201.01.25.23 01.2011
CAUTION: Install only approved software
To prevent interference with the runtime reliability of the program, only
approved software may be installed.
CAUTION:
Ventilation openings must not be obstructed.
4.1.4

Maintenance and repair

As manufacturers of dental instruments and laboratory equipment, we can
assume responsibility for the safety properties of the unit only if the following
points are observed:
The maintenance and repair of this unit may be performed only by Sirona
or by agencies authorized by Sirona.
Components which have failed and influence the safety of the unit must be
replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
The type and scope of work.
Any changes made in the rated parameters or working range.
Date, name of company and signature.
4.1.5

Modifications of the unit

Modifications to this unit which may affect the safety of the operator, patients
or third parties are prohibited by law!
4.1.6

Accessories

To ensure product safety, this product may be operated only with original
Sirona accessories or third-party accessories expressly approved by Sirona.
The user assumes the risk of using non-approved accessories.
Available Accesorry
Camera support 6 pcs, Order No. 59 45 360.
4.1.7

SIROCAM 3

If a SIROCAM 3 is installed, the safety information provided in the relevant
operating instructions must be observed.
4 Safety
Basic safety information
11