Overview Of The Sampler's Indicators And Test Functions - Agilent Technologies 1200 Series User Manual

Overview of the Sampler's Indicators and Test Functions

Status Indicators
The autosamplers are provided with two status indicators which indicate the
operational state (prerun, run, and error states) of the instrument. The status
indicators provide a quick visual check of the operation of the autosampler .
Error Messages
In the event of an electronic, mechanical or hydraulic failure, the instrument
generates an error message in the user interface. For details on error
messages and error handling, please refer to the Agilent Lab Monitor &
Diagnostic Software.
Maintenance Functions
The maintenance functions position the needle arm, gripper assembly, and
metering device for easy access when doing maintenance.
Step Commands
The step functions provide the possibility to execute each step of the sampling
sequence individually. The step functions are used primarily for
troubleshooting, and for verification of correct autosampler operation after
repair.
Agilent 1200 Series Autosampler User Manual
Overview of the Sampler's Indicators and Test Functions
Troubleshooting and Diagnostics
6
73