Table of Contents
Advertisement
Instrument Diagnostic screens
Diagnostic Test screen
Purpose: To run diagnostic tests on the instrument. See instructions in
diagnostic tests"
To open: From the Home screen, press Settings. On the Settings screen press Self Diagnostic.
Then, press Run Diagnostic Test.
Figure 60 Diagnostic Test screen – Prior to starting diagnostic test
Figure 61 Diagnostic Test screen – During running of diagnostic test
Select diagnostic test
Use the check boxes in this list to select which diagnostic tests to perform. To quickly select all
tests, mark the All Tests check box at the top of the list.
Magnis and MagnisDx NGS Prep System User Guide
on page 39.
"Perform instrument
81
Advertisement
Table of Contents
