Running Samples - Agilent Technologies 4100 User Manual

Operation
8
9
10 Click Sequence to specify the end of run actions, number of
11 If you are using an autosampler, click the 'Autosampler' tab to
See the MP Expert Help for a more detailed description of setting up a method.
NOTE

Running Samples

To run samples:
1
For further information about running an analysis, refer to the MP Expert Help.
NOTE
42
Click Standards to enter the concentration of the elements in
your standards and select whether to use other options such as
Standard Additions or MultiCal.
Click IEC (if enabled) to enter the concentration of the elements
in your IEC standards.
samples, select the solution type and edit the sample labels.
select the racks and probe depth (if needed). Depending on the
autosampler selected, options may vary.
Click the Analysis tab and do the following:
a
Ensure your samples are selected. This will be indicated by a
check next to the Rack:Tube column. To select all solutions,
select the checkbox next to the Rack:Tube title.
b
Click the Run icon in the toolbar (or press the SHIFT+F8
keys) to begin the analysis, and follow the subsequent
prompts.
Agilent Microwave Plasma Atomic Emission Spectrometers User's Guide