Monitoring Baseline And Adjust Plot; Adjusting The Plot In Any Of The Following Ways - Agilent Technologies 6475 User Manual

3 Tuning

Monitoring Baseline and Adjust Plot

Monitoring Baseline and Adjust Plot

The detector signals and various instrument parameters can be displayed in the
Chromatogram Plot window. You can select the signals and adjust their display
characteristics as follows. The customizations you make to the plot remain, even
if you close the MassHunter Data Acquisition software program and reopen it.
1 Display the Chromatogram Plot window if it is not visible in the MassHunter
2 Right-click the Chromatogram Plot window, and select Change. The Edit
3 Select the signal to monitor and set the X and Y range for the plot.
4
5 Click OK to close the Edit Signal Plot dialog box.

Adjusting the plot in any of the following ways:

1 Click and drag the cursor to zoom into the plot.
2 Click Autoscale XY in the shortcut menu to automatically adjust the scale to
3 Right-click the Chromatogram Plot window to access these other options for
Agilent 6475 Triple Quad LC/MS System User Guide
Data Acquisition software program.
Signal Plot dialog box appears.
To add other MS signals, such as EICs, setpoints, and actuals, select these in
the TQ Chromatograms Section
show the entire spectrum.
changing the display:
• Click Freeze to temporarily stop the automatic scrolling of data along the
x-axis.
• Click Zoom Out to undo all zoom operations.
• Click Undo Zoom to undo the last zoom operation.
in the Method Editor window.
36