Table of Contents
Advertisement
Pump Module User Guide
Laboratory setup requirements
Laboratory setup requirements
Placement considerations
Specifications
6
South Korean Class A EMC declaration
This equipment is Class A suitable for professional use and is for use in
electromagnetic environments outside of the home.
The Pump Module must be located near a power source to connect the power
cord, and near the controlling liquid- handling device to connect the
communication cable. If applicable, the Pump Module must be positioned to
enable connecting the cable from the Agilent Weigh Station, Weigh Pad, or
Weigh Shelf.
IMPORTANT
Make sure the Pump Module is located away from heat and air
conditioning ducts and away from direct sunlight, as these conditions could
interfere with the Pump Module performance.
The following figure shows the Pump Module dimensions.
Figure Pump Module dimensions (front and side view)
14.6 cm
25.4 cm
23.5 cm
00310
Pump Module User Guide
Advertisement
Table of Contents
