Table of Contents
Advertisement
3
Tuning
Configure Tune
Configure Tune
Accessible only to the Lab Manager or Everything role, configure tune is used to
select from a broad range of tunes to make them available to other roles.
1 In MassHunter Acquisition, click Method Editor in the Windows section of the
2 In the Method Editor window, click the MS Q-TOF tab.
3 Click Tune > Configure Tune in the left pane.
4 Click
5 When clicked, tune setpoints are applied. If an action is not selected within the
30
Ribbon to display the Method Editor window.
A list of instrument modes and tunes is displayed.
Tune control.
This button locks control of the LC/Q-TOF instrument and changes the status
of the instrument to Tune, as shown in
worklist cannot be started when Tune has control of the LC/Q-TOF
instrument.
Figure 8. Tune Status
timeout period of three minutes, the system will go back to the method
setpoints.
Figure
8. A single sample run or a
Agilent Revident LC/Q-TOF System User Guide
Advertisement
Table of Contents
