38
Func.
Code
Scaled output frequency
monitor
Actual frequency monitor
Torque command monitor
Torque bias monitor
Output torque monitor
Output voltage monitor
Input power monitor
Watt-hour monitor
Elapsed RUN time monitor
Elapsed power-on time
monitor
Heat sink temperature
monitor
Life check monitor
Program counter monitor
[EzSQ]
Program number monitor
[EzSQ]
User monitor 0
[EzSQ]
User monitor 1
[EzSQ]
User monitor 2
[EzSQ]
Positioning command
monitor
Current position monitor
Dual monitor
Inverter mode monitor
"d" Function
Name
Displays
scaled by the constant in .
Decimal point indicates range:
0 to 3999
Displays
range is -400 to 400 Hz
Displays
range is -200 to 200 %
Displays the torque bias value,
range is -200 to 200 %
Displays the output torque, range is
-200 to 200 %
Voltage of output to motor,
Range is 0.0 to 600.0V
Displays the input power, range is 0
to 999.9 kW
Displays watt-hour of the inverter,
range is 0 to 9999000
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)
Displays total time the inverter has
been powered up in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)
Temperature of the cooling fin,
range is -20~150
Displays the state of lifetime of
electrolytic capacitors on the PWB
and cooling fan.
Range is 0 to 1024
Range is 0 to 9999
Result of EzSQ execution, range is
–2147483647~2147483647
Result of EzSQ execution, range is
–2147483647~2147483647
Result of EzSQ execution, range is
–2147483647~2147483647
Displays the positioning command,
range is –268435455~+268435455
Displays the current position, range
is –268435455~+268435455
Displays
configured in and .
Displays currently selected inverter
mode :
I-C:IM CT mode/I-v:IM VT mode/
P:PM
Description
the
output
frequency
the
actual
frequency,
the
torque
command,
Lifetime expired
Normal
Cooling fan
Electrolytic caps
two
different
data
Run
Mode
Units
Edit
Hz times
constant
Hz
%
%
%
V
KW
hours
hours
C