Hitachi WJ200-001S Instruction Manual page 286

Low Load Detection Signal
The low load detection signal output indicates the general status of the inverter output
current. When the output current becomes less than the value specified by , the
LOC output turns ON.
Option Terminal
Code Symbol

Low load detection
LOC
11, 12, AL0 – AL2
Valid for inputs:
,
Required settings
Notes:
General Input (1)~(3)
The functions are for EzSQ. Refer to a manual of EzSQ for detailed description.
Option Terminal
Code Symbol

MO1 General input (1)

MO2 General input (2)

MO3 General input (3)
11, 12, AL0 – AL2
Valid for inputs:

Required settings
Notes:
Refer to a manual of EzSQ for detailed explanation.
Function Name State
ON
OFF

Function Name State
ON
OFF
Description
When the output current becomes less than the

value specified by
When the output current is more than the value

specified by
Example for terminal [11] (default output
configuration shown – see
Inverter output
terminal circuit
CM2
Example for terminal [AL0], [AL1], [AL2] (requires
output configuration – see
Inverter logic
circuit board
AL0 AL1
Power
supply
See I/O specs on page 4-6
Description
Each general output is turned on
Each general output is turned off
479
page 3-89):
LOC
11
RY
page 4-51 and 3-91):
LOC
AL2
Load