Hitachi WJ200-001S Instruction Manual page 434

Wj200 series single/three-phase inputs 200v/400v class

Hide thumbs Also See for WJ200-001S:

Table of Contents

■ Way to PM mode switching

Step 1:03 is selected by

b171, and push [SET] key.

Note 1: For prevent from initializing by mistake, (b084) and (b180) restore 00 after initialize or Re-power supply.

Every time, please set it every time if you initialize.

Note 2: Even if initialize, the initial data select (b085), the input span calibration (C081, C082), and the

thermistor input (PTC) span calibration (C085) don't initialize.

Note 3: There is not any way to restore the previous parameter setting after initialize.

Step 2:01 is selected by

b180, and push [SET] key.

Step 3:When the

initialization display

ends, it is initialization

The content of initialization and the

operation mode after initialize blink

alternately while initializing.

Blink alternately

Initialization

Troubleshooting