Hitachi WJ200-001S Instruction Manual page 197
Wj200 series single/three-phase inputs 200v/400v class
Hide thumbs
Also See for WJ200-001S:
- Quick reference manual (104 pages) ,
- Instruction manual (421 pages) ,
- Quick reference manual (95 pages)
Table of Contents
Advertisement
3112
Encoder (Pulse Train Input) Related Settings
You can achieve speed control or simple positioning control by using pulse train input.
Following table shows the related parameters of those function. Please refer to chapter
4 for the detailed description.
Func.
Code
[EA] terminal selection
Pulse train input mode
selection for feedback
Encoder pulse setting
Simple positioning
selection
Creep Speed
Over-speed error
detection level
Speed deviation error
detection level
Speed control Related Settings
Set "" in and "" in , then output frequency is controlled by single phase
pulse train input to EA terminal.
"P" Function
Name
Three option codes:
...Speed reference (incl. PID)
...For control with encoder
feedback
...Extended terminal for EzSQ
Four option codes:
...Single-phase pulse [EA]
...2-phase pulse (90 difference)
1 ([EA] and [EB])
...2-phase pulse (90 difference)
2 ([EA] and [EB])
...Single-phase pulse [EA] and
direction signal [EB]
Sets the pulse number (ppr) of the
encoder, set range is 32~1024
pulses
Two option codes:
...simple positioning
deactivated
...simple positioning activated
Set range is start frequency ()
~10.00 Hz
Set range is 0~150%
Set range is 0~120 Hz
Description
Defaults
Run
Mode
Initial data
Units
Edit
00
00
512.
00
5.00
115.0
10.00
Hz
%
Hz
Advertisement
Table of Contents
Troubleshooting
