Hitachi WJ200-001S Instruction Manual page 564

Ex Ex Cases where internal registers are invalid
Ex Ex
８ ８ ８ ８
* * * * Below setting must be entered from the operator before Modbus communication, with power cycle.
Case 1 A case where internal register not yet is selected (Please refer to document page1 for setting range) ）
External register
number
6001h
Case 2: When selecting 32-bit parameter for an internal register. (Please refer to the page 1 for setting
range.
External register
number
6002h
Case 3: When selecting 32-bit parameter for an internal register. (Please refer to the page 1 for setting
range. ）
External register
number
6003h
Case 4 When Hitachi register number does not exit.
External register
number
6004h
Internal register
number
0000h
Internal register
number
1216h
（ A 20 （ H IGH ） ）
Internal register
number
1217h
（ A 20 （ L OW ） ）
Internal register
number
12FFh
（ N o corresponding
code in parameter ）
Scaling
1.000 Unsigned
Scaling Format
1.000 Unsigned
Scaling Format
1.000 Unsigned
Scaling Format
1.000 Unsigned
Ver.3− − − − 55
Format