Operation Condition Of Speed Detection; Position Feedback Monitor (D030)" Enabling At "Simple Positioning"-Off; Frequency Source Monitor; Run Source Monitor - Hitachi WJ200-001S Instruction Manual

Wj200 series single/three-phase inputs 200v/400v class

Hide thumbs Also See for WJ200-001S:

Table of Contents

Operation condition of speed detection

" Actual-frequency monitor(d008)" is valid, when P003=01, even if both "V/f control with FB" and "simple

positioning" are invalid. In a word, that is independent of the setting of A044 and P012.

" Position feedback monitor (d030)" for "simple positioning" is valid, when P003=01. That is independent of the

setting of P012. d030 is cleared with even P012=00 ("simple positioning" invalidity) and PCLR ON.

In the case of P012=00, terminal function PCLR, PSET is valid.

I t displays the frequency source that considered the A001 / A201 and intelligent input selections (CF1 – CF4,

JG, SET, AT, OPE, SF1 – SF7, and F-TM).Following are the related parameters for this function.

d d d d 0 0 0 0 6 6 6 6 2 2 2 2

I t displays the RUN source that considered the A002 / A202 and intelligent input selections (SET, OPE, and

F-TM).Following are the related parameters for this function.

d d d d 0 0 0 0 6 6 6 6 3 3 3 3

Run source monitor

Multi-speed freq. 1 to 15

Jog frequency

Modbus network

Frequency source

Potentiometer

Calculate function output

Frequency source

Modbus network

Ver.3− − − − 3

1 1 1 1 5 5 5 5

1 1 1 1 6 6 6 6

1 1 1 1 8 8 8 8

1 1 1 1 9 9 9 9

2 2 2 2 1 1 1 1

2 2 2 2 6 6 6 6

2 2 2 2 7 7 7 7