Hitachi WJ200-001S Instruction Manual page 150

Wj200 series single/three-phase inputs 200v/400v class

Hide thumbs Also See for WJ200-001S:

Table of Contents

NOTE: If the DC bus voltage comes down to the UV level during this operation, the

inverter trips with under-voltage and motor will free-run (coast) to a stop.

NOTE: If the set value of <, then the inverter internally swaps the  and

 values. However the displayed values are not changed.

NOTE: This function cannot be interrupted until it is completed. So if the power is

restored during this operation, wait until the operation is done (motor stops) and then

give the run command.

Troubleshooting