Hitachi WJ200-001S Instruction Manual page 245

438
Torque Limit Switch
This function is to select the torque limit mode. (Please refer to for the detailed
description of the function.)
Option Terminal
Code Symbol

TRQ1
 TRQ2
Valid for inputs:
Required settings
Brake Confirmation
This function is for brake performance. Please refer to chapter 3 for the detailed
description of the function.
Option Terminal
Code Symbol

BOK
Valid for inputs:
Required settings
Function Name State
Torque limit switch
1, 2
~
 
~
Function Name State
Brake confirmation
~
~, ~
ON
Torque limit value of
OFF
by the combination of the switches.
Example (default input configuration shown—see
page 3-85):
7 6
See I/O specs on
ON Brake confirmation signal is being given
OFF Brake confirmation signal is not given
Example (default input configuration shown—see
page 3-85):
7 6 5
See I/O specs on
Description
 
to will be selected
TRQ2 TRQ1
5 4 3 2 1 L
PLC
page 4–6.
Description
BOK
4 3 2 1 L PLC
page 4–6.
P24
P24