Hitachi WJ200-001S Instruction Manual page 66

shall be connected with, LS Industrial System Co., Ltd, Type E Combination
Motor Controller MMS Series .
Terminal Dimensions and Torque Specs
The terminal screw dimensions for all WJ200 inverters are listed in table below. This
information is useful in sizing spade lug or ring lug connectors for wire terminations.
WARNING: Tighten the screws with the specified torque in the table below. Check for
any loosening of screws. Otherwise, there is the danger of fire.
WJ200 - 001S,002S,004S
WJ200 - 001L,002L,004L,007L
WJ200 - 007S,015S,022S
WJ200 - 015L,022L,037L
WJ200 - 004H,007H,015H,022H,030H,040H
WJ200 - 055L,075L
WJ200 – 055H,075H
WJ200 - 110L
WJ200 - 110H,150H
WJ200 - 150L
Types
Screw Width
Diameter (mm)
M3.5 7.6
M4 10
M5 13
M6 17.5
M8 23
217
Tightening Torque
(Nm)
1.0
1.4
3.0
3.9 to 5.1
5.9 to 8.8