Hitachi WJ200-001S Instruction Manual page 167

382

How to authenticate Password
For a person who knows the password, unlock password protection as follows.
(4) Set password in  and/or .

(5) If entered password is matched, " (Good)" is displayed for 1 second and
password protection is unlocked temporary. If cycling the power or no key
operation lasts 10 min., password protection is enabled again automatically. If
entered password is unmatched, " (Error)" is displayed and protection is not
unlocked.

How to change Password
(6) Make password authentication as above (4).
(7) Set new password in  and/or 
.
(8) After changing the password, password protection is enabled automatically.

How to delete Password
(9) Make password authentication as above (4).
(10) Set "" in  and/or 
(11) Password has been deleted and all the password information are cleared
.

SET
ESC

SET
ESC

SET
ESC

SET
SET

SET

SET
SET

SET
SET
Displays for 1sec.
 
Displays for 1sec.

 .
SET
 
SET