Hitachi WJ200-001S Instruction Manual page 135

350
 Free setting (=)
Reduction rate
x1.0
x0.8
0
Output frequency [Hz]
Electronic Thermal Warning Output: You can configure this function so that the
inverter outputs a warning signal before the electronic thermal protection operates
against motor overheat. You can also set the threshold level to output a warning signal
with the electronic thermal warning level setting in function "".
To output the warning signal, assign parameter "" (THM) to one of the intelligent
output terminals [11] to [12] ( to ), or to the relay output terminal ().
Setting range
3 400
Output current [A]
b020
b018
b016
0
b015 b017 b019
Output frequency [Hz]
A004 Max. FQ