Download  Print this page
   

Advertisement

WJ200
Quick Start
Quick Start Essential
Parameters
b037 – Unlocks parameters (default 04)
A001 – Frequency (Speed) Source (default 02)
A002 – Run Command Source (default 02)
b012 – Motor nameplate current (default varies)
b091 – Stop Mode (default 00)
H004 – Motor nameplate poles (default 4 poles)
F001 – Keypad Speed setting (default 00.00)
F002 – Acceleration time (default 10 seconds)
F003 – Deceleration time (default 10 seconds)

Advertisement

Table of Contents

   Related Manuals for Hitachi WJ200

   Summary of Contents for Hitachi WJ200

  • Page 1 – Motor nameplate current (default varies) b091 – Stop Mode (default 00) H004 – Motor nameplate poles (default 4 poles) F001 – Keypad Speed setting (default 00.00) F002 – Acceleration time (default 10 seconds) F003 – Deceleration time (default 10 seconds) WJ200 Quick Start...
  • Page 2 Now you can change the 04 to 00 using the current using the UP and Down keys down key Press the SET key to save the data Press the SET key to save the data Now you have unleashed your WJ200 drive!
  • Page 3 To Set the Speed Reference To Set the Motor Poles Press ESC to enter programming mode Press ESC to enter programming mode Press ESC until parameter H001 is on the Press ESC until parameter A001 is on the display of your drive display of your drive Press the UP key until H004 is reached Then press the SET key to enter the A001...
  • Page 4 To Set the Run Command To Set the Frequency or Speed Source Press ESC to enter programming mode Press ESC to enter programming mode Press ESC until parameter A001 is on the Press ESC until parameter F001 is on the display of your drive display of your drive Press the UP key until A002 is reached...
  • Page 5 To Set the Acceleration Time To Set the Deceleration Time Press ESC to enter programming mode Press ESC to enter programming mode Press ESC until parameter F001 is on the Press ESC until parameter F001 is on the display of your drive display of your drive Press the UP key until F002 is reached Press the Up key until F003 is reached...
  • Page 6 To Set the Stop Mode TECH SUPPORT 980-500-7141 Press ESC to enter programming mode WEBSITE Press ESC until parameter b001 is on the www.hitachi-america.us/ice/inverters display of your drive EMAIL Press and hold the UP key until b091 is inverterinfo@hal.hitachi.com reached...

Comments to this Manuals

Symbols: 0
Latest comments: