Hitachi WJ200-001S Instruction Manual page 244

Overload Restriction Source Changeover
This function allows you to change the parameter sets of overload restriction. (Please
refer to chapter 3 for the detailed description of the overload restriction function.)
Option Terminal
Code Symbol

OLR Overload restriction
source changeover
~
Valid for inputs:
~
Required settings
Torque Limit Selection
This function is to select the torque limit mode. (Please refer to chapter 3 for the
detailed description of the function.)
Option Terminal
Code Symbol

TL Torque limit
selection
~
Valid for inputs:
~
Required settings
Function Name State
ON
OFF
Function Name State
ON
OFF
Description
Parameter sets , ,
Parameter sets , ,
Example (default input configuration shown—see
page 3-85):
7 6 5 4 3
See I/O specs on page 4–6.
Description

value is enabled as torque limit level

value is disabled
Example (default input configuration shown—see
page 3-85):
7 6 5 4
See I/O specs on page 4–6.
437

are enabled.

are enabled.
OLR
PLC
2 1 L P24
TL
3 2 1 L PLC P24