Notes And Restrictions On The Security Features - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Addresses Registered on Job Flows
If you specify a speed dial or an address registered on the Address Book when creating a
job flow on the machine, any subsequent change of the number or address on the Address
Book is not reflected on the job flow created. To transmit to the changed address, you must
directly correct the address registered on the job flow.

Notes and Restrictions on the Security Features

Allow User to Disable Active Settings (for Forcible Printing Features)
This feature cannot apply to the ordinary print jobs. This feature is applicable to the jobs
stored in the machine and then printed by the instruction from the touch screen, such as
Copy, Secure Print, Private Charge Print, Print Stored File, Media Print - Text, and Media
Print - Photos .
Notes and Restrictions on the Authentication and Accounting Features
Notes and Restriction on Authentication and Accounting
The general shared folders created under the [No Login Required] mode become
unavailable after the machine's login type is changed to require login.
When the machine's login type is set to require login, the private folders and the
administrator shared folder can be created. The general shared folder cannot be created.
Notes on the User ID setting
If you change the [User ID for Login] setting under [Authentication / Security Settings] >
[Authentication] > [User Details Setup], the registered user information including the user-
related folders and job flow sheets will be deleted.
Notes on Job Status Default Setting
If you set [Hide Job Details] on [Authentication / Security Settings] > [Job Status Default],
you cannot stop or delete jobs you instructed. Therefore, you cannot cancel jobs in the case
of operational error of copies or wrong transmission of faxes.
Remote Authentication using the Smart Card
Remote Authentication can be performed in an environment where Active Directory is
used.
Change the default realm name only when you want to use a different realm name.
Notes and Restrictions for Using SMB
This section describes notes and restrictions to observe when using SMB.
Configuration on the Machine
IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.
The setting of subnet mask and gateway addresses may be required depending on the
network environment. Consult your network administrator and configure the required
settings.
Notes and Restrictions
735
16